Basic Distance Measurement:
- What it does: Instantly measures straight-line distances from the laser position level to any surface the laser dot can reach.
- How it’s used: Place the laser position level against one wall, aim the laser dot at the opposite wall, and press a button. The length of the room is displayed instantly. This is invaluable for quick room dimensions, checking material lengths, or verifying clearances
Layout (Projection) and Preset Value Measurement:
- Layout (Projection): Using the stable laser line as a reference, you can quickly mark multiple points at equal heights or alignments (e.g., for cabinet mounting, tile starts, or electrical outlets) by measuring along the beam.
- Preset Value / Deviation Measurement: You input a “benchmark” or desired distance into the tool. Then, you measure an installed door. Instead of showing a raw distance, the tool displays the deviation (e.g., “+0.5 in” or “-0.25 in”). This allows for lightning-fast quality control checks against a specification across multiple items.
DL-04 Laser Position Level
|
Laser Level Module
|
| Laser line type |
3D/ 12 lines |
| Wave length |
520nm |
| Laser class |
Class 2 |
| Accuracy: |
±1 mm @ 7 m |
| Auto-Leveling range |
±3° |
| Self-leveling time |
＜5s |
| Tilt alarm |
Yes |
|
Laser Meter Module
|
| Measuring Range |
0.05~40m |
| Measuring Accuracy |
± ( 2mm +5×10-5 Dmm) |
| Laser class |
Class 2 |
| Selection of measurement benchmark |
Front vertical line/ bottom horizontal line |
| Single measurement |
Yes |
| Continuous measurement |
Yes |
| Measurement unit |
m |
| Layout and preset value distance measurement |
Yes |
| Type of battery |
Lithium battery 3.7V 3000mAh |
| Laser class |
Class 2 |
| Wave length |
650nm |
| Operating temperature |
-5~40℃ |
| Storage temperature |
-20~60℃ |
| Protection class |
IP54 |
The Laser Position Level revolutionized construction, woodworking, and interior design by projecting perfectly straight, level, eliminating the guesswork of chalk lines and spirit levels. It is a complete layout and verification system.
Applications of Laser Position Level
- Drywall & Ceiling Grid Installation: Rapidly establish level perimeter lines and measure precise locations for T-bar intersections or light fixtures.
- Cabinet & Shelving Installation: Ensure a perfectly level mounting line for an entire kitchen’s worth of cabinets and quickly mark stud locations at consistent intervals.
- Landscaping & Deck Building: Establish level grades over long distances and precisely measure post placements.
- HVAC & Electrical: Layout duct runs, conduit, and outlet boxes with perfect alignment and spacing from architectural features.
- Professional Tiling: Create a perfect level baseline and measure for precise cuts at the edges of a room without constant manual measurement.
Description
Stadia Measurement (Height Tracking / Continuous Measure)
- While the leveling laser projects a stable horizontal or vertical line, the distance meter module is used to take measurements along that line.
- How it works: Imagine you need to find a point exactly 120 inches (or 3 meters) from a wall along a level horizontal line. You first set up the laser level to project a level line. Then, using the LDM, you walk along the beam. The LDM displays the live, changing distance to the laser position level. You stop precisely when it reads “120 inches.” You’ve just found that exact point without a tape measure, completely alone.
